Fluid Rock Drilling with the MINI-JET MJ 1600

Pit Launched Machines: Fluid Rock Drilling with the MINI-JET MJ 1600
In St.Gallen, Switzerland a new power line was laid in rock. Space was limited. Therefore the contractor Stefan Klammsteiner decided to use his HDD pit machine TERRA MINI-JET MJ 1600.

The 20 m (66 ft) long pilot bore went through pure rock. This made Fluid Rock Drilling with the TERRA-ROCK 65 necessary. The TERRA-ROCK 65 is driven by compressed air, water is added into the air, the newly developed "TERRA Rock Add 1304" is mixed into the water.

The pilot bore took around one day. Then the directional rock bit of the TERRA-ROCK 65 was replaced by a hole opener to expand the bore channel in a second operation.

The TERRA-ROCK Air Percussion Head is driven by compressed air. The air pressure should be 12-14 bar (175 - 200 psi). If you operate a 7 bar (100 psi) compressor, we recommend to increase the air pressure to 9 - 10 bar (130 - 145 psi).

Water is added to the compressed air. In advance the additive "TERRA Rock add 1304" is mixed into the water.This drilling fluid is escapes at the directional rock bit and prevents a plugging of the air exhaust holes in the drill bit. This allows the operation of the TERRA-ROCK air percussion head even in mixed grounds and in clay.

- Rock Add 1304 increases the drilling speed in rock. - Rock Add 1304 stabilises a bore channel, even in non-rocky ground like mixed grounds or clay. - Rock Add 1304 ensures the continuous backflow of the dismantled ground and cuttings.Rock Add 1304 is environment friendly. The fluid drill mud must not be disposed.

Pic 1: Fluid Rock Drilling with the MINI-JET MJ 1600

Pic. 2: View into the starting pit

Pic. 3: Installation of the pit machine into the starting pit

Pic. 4: Mixing of the additive "Rock Add 1304"

Pic. 5: Start of the pilot bore

Pic. 6: The split rod wiper prevents that the pit machine gets dirty by the blown out cuttings.

Pic. 7: These cuttings are broken by the TERRA-ROCK 65, mixed with the drilling fluid and blown backwards by the blow-out adapter along the 20 m (66 ft) long bore channel.
Pit Launched Machines: View into the starting pit
Pit Launched Machines: Installation of the pit machine into the starting pit
Pit Launched Machines: Mixing of the additive

Pit Launched Machines: Start of the pilot bore
Pit Launched Machines: The split rod wiper prevents that the pit machine gets dirty by the blown out cuttings.
Pit Launched Machines: These cuttings are broken by the TERRA-ROCK 65, mixed with the drilling fluid and blown backwards by the blow-out adapter along the 20 m (66 ft) long bore channel.

 en haut

TERRA AG für Tiefbautechnik - Hauptstrasse 92 - 6260 Reiden - Schweiz - Tel. +41 62 749 10 10 - office@terra-eu.eu